Walkera 3,500KV/RPM Brushless Motor

[rtfheli]

Rating: 5 out of 5

•Dimension:Ö 26 X 32.5mm
•Speed constant(KV):3500RPM/V
•No-Load Current:< 3.2A
•Working voltage:6-18V
•Shaft extension:17.0mm
•Shaft diameter:Ö3.0mm
•Weight:60g

Pros:
Walkera 3,500kv/rpm Brushless Motor comes w/13t pinion installed and mounting screws.

Cons:
None



Very nice outrunner brushless motor as it comes with a pre-installed 13t pinion and comes with motor mount screws. This bad boy gives 3,500 RPM/KV which is enough to do aerobatic inverted flying without a sweat. Typically mounted for any 350-400 class electric heli such as the Exceed Raptor G2/ Walkera #36. A 25AMP ESC is recommended, but use a 30 AMP ESC like the Exceed Volcano 30 AMP Programmable ESC. It is always better to get an ESC that is rated slightly more than the motors peak Amps.

[19000rpm]

This has been a very reliable motor when installed in the G2 400 class heli. Over 150 flights so far and when teamed with the volcano 30Amp ESC.

Happy landings