Doozer
Paint Staff 
FIRST 30 MEMBER
Working on GP Ultimate Biplane
Posts: 1,508
|
Post by Doozer on Mar 2, 2009 13:25:36 GMT -6
Whatever you do when you go brushless don't use the Belt CP combo. It haa a tendency to burn up the 20A ESC. The volcano 30Aand alpha 3500kv combo should work good or any 3500Kv with at least a 25A ESC. You might also want to get a Telebee gyro for it as well. It's much better than the stock. Happy landings  |
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Mar 2, 2009 18:22:05 GMT -6
Not familiar with that set up. Main thing is to make sure that the ESC has higher rated A than the motor. That's constant A. Burst is usually 100% more than constant A.
Happy landings
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Mar 2, 2009 18:29:24 GMT -6
Dooz, I remember those graphic pics...News at 11 stuff for sure. I try to erase them from my memory, but they are "burned" in there and, probably, always will be... Happy landings |
|
mimir
BRONZE MEMBER
Posts: 218
|
Post by mimir on Mar 2, 2009 22:34:28 GMT -6
Thanks all for the helpful advice. I will try to keep you all updated on my progress.  |
|
jerry
NEWBIE MEMBER
Posts: 41
|
Post by jerry on Mar 3, 2009 5:01:52 GMT -6
I have been looking at the e-sky 3900, but found a 400X spec'd at 4000kv, 20 Amp current draw for $28.00. Either one of those motors will work fine in the K2, just make sure you get at least a 30A esc just to be safe. And don't use an Esky esc or you might end up with a 'Blazing Bee'  |
|
Doozer
Paint Staff
FIRST 30 MEMBER
Working on GP Ultimate Biplane
Posts: 1,508
|
Post by Doozer on Mar 4, 2009 11:59:54 GMT -6
Whatever you do when you go brushless don't use the Belt CP combo. It haa a tendency to burn up the 20A ESC. ... Happy landings you can use this combo if you like... just make sure that you bring s'more fixin's. |
|
mimir
BRONZE MEMBER
Posts: 218
|
Post by mimir on Mar 4, 2009 23:24:40 GMT -6
I think I would prefer my HB without the flaming ball, if it is all the same to y'all  ;D Or the s'mores either.... Here is what I ordered: Dynam 30A Brushless ESC BEC Motor Main Gear Pinion Set (9+10+11T) 2.3mm Shaft HDX Brushless Motor 4000KV 2.3mm w/ Motor Fan - King V2/V3 |
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Mar 5, 2009 7:49:45 GMT -6
That looks like a great combo...Really, too good for the HBK2 IMHO. Good news is that you'll be able to use in your next heli; a kit. ;D
Happy landings
|
|
;D