rtfheli
DEALER 
FIRST 30 MEMBER
"Live to Fly"
Posts: 867
|
Post by rtfheli on Oct 30, 2011 16:53:09 GMT -6
Okay, we have finally got what everyone wanted after reading the many passionate posts for this under appreciated 6-channel Belt CP helicopter. Upgrade the Main Rotor to FLYBARLESS with 3G Technology:While the Walkera 1#A is great to fly but, upgrading to a FLYBARLESS Rotor Head System will make repairing this helicopter really easy and fast. Less spare parts will also reduce the cost of reparing. Additionally, adding the new 3G technology (Formerly 3-AXIS GYRO Technology) will make it even easier to fly. The 3G Technology allows for automatic stabilization when flying. Just replace the flybar head with the FLYBARLESS HEAD and then replace the old RX with the new RX. It's that simple. Upgrade the Brushless motor to a 4,500RPM/KV brushless motor increasing overall Performance: The Stock brushless motor is rated at 3,500rpm/KV and it can be underpowered especially with the stock 7.4v LIPO. The upgraded brushless motor spins at 4,500rpm/Kv making the helicopter fly with authority (Faster than the Turbo Ace 4,200rpm/kv brushless motor). This adds more lift to the helicopter with the same amount of throttle. This brushless motor stays cool after flying which means just swap out the LIPO Battery with a fresh one to start flying again. Super Charge with an Upgraded 11.1 Volt LIPO Battery: We super Charged this helicopter with an 11.1 Volt 1,300Mah 25c LIPO Battery increasing the overall performance. This mod should be used with the brushless motor we sell. The stock brushless motor may cause the stock ESC to heat up/ burn out. With our brushless motor, the stock ESC stays warm. Super Skids 200 w/adapter 22 and Metal Main Frame Bottom:The stock landing skid is flimsy as the plastic is very brittle and prone to breaking easy. We replaced it with the much more durable Super Skids 200 Landing Skids and then added the Metal Main Frame Bottom. No more flimsy battery tray. Just use rubber bands to secure the LIPO to the metal main frame. 3.5mm Banana ON/OFF Power Switch:We finished off the helicopter by adding the very convenient ON/OFF Power Switch. BELOW IS A VIDEO OF THE WALKERA HM 1#A FLYBARLESS IN ACTION !!! GET THE MOD AT: WWW.RTF-HELI.COM |
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Oct 31, 2011 8:29:24 GMT -6
Nice mods.
|
|
