first flight with 7100r rev limit working

[Evan]

okay thats kinda a lie, i did a few hovers before this flight this was the very first flight to see how it was working.

odd thing is i lowered my norm throttle curve to 0, 33, 66, 73, 80

gove gain is set at 85 and 90. rpms lowere when i flip into idle 1, you can hear it when i go to land the motor speeds up. i havent figured out how to use the tach i have and the dang rpm telemetry will take some figureing out to get it working.

anyways heres the first flight

[McKrackin]

The rev limiter only works above 50% throttle.
Your curve weirds it out since you have a more than 50% value assigned below 50% throttle.

When your stick drops below half stick,the rev limiter quits and the throttle value increases.

Just make the normal curve linear 0-25-50-75-100 and fly in idle up at 100% flat.

[McKrackin]

It's hard to explain clearly.lol...Just fly 100% flat.

[Evan]

im trying to get normal mode no revlimit to kinda match stunt mode with rev limit.
gov gain is set at 80% in stunt two in this flight. normal mode no rev limit is set at 80% max throttle curve.
in the vid i was flying stunt 1 80% mid stick and stunt 2 85? in both modes revlimit was working in a hover. ive since changed to 100% flat in both and i also added rev limit to normal mode at 85%. i want to see what happens

ohhhh after this flight it went for 8 or 9 minutes only took a short vid of it. at the end after i landed and shut it down and was walking back to truck my 200 deg alarm went off. i know it probly heated up alittle after shutting down for a split second but i still when i got to truck tweaked the h open about a 1/16.

i want to be able to take off and fly normal mode and a linerar curve makes the tail bobb up and down like crazy. thinkn to hard arent i i could just spool up on linear curve and then swtich before take off like i do alot of times anyways