rtfheli
DEALER 
FIRST 30 MEMBER
"Live to Fly"
Posts: 867
|
Post by rtfheli on Apr 20, 2014 20:09:33 GMT -6
THIS IS FOR WALKERA USERS WHO ARE THINKING ABOUT BUILDING AN ALIGN TREX 450 PRO DFC HELICOPTER KIT AND WANT TO USE THEIR EXISTING DEVO 7, 7E, F7, 8S, 10, AND/OR 12S TRANSMITTER. THIS ALIGN TREX 450 PRO DFC BUILD TOOK ABOUT FOUR HOURS TO ASSEMBLE AND ANOTHER 2 HOURS TO INSTALL THE ELECTRONICS. INSTEAD OF USING A STANDARD 7-CHANNEL OR HIGHER RX (SPEKTRUM DX8I AND AR8000) WITH THE SEPARATE 3GX GYRO, WE USED THE ALL-IN-ONE WALKERA RX-2703H-D INTEGRATED RECEIVER. THIS RX CONTAINS A 6-AXIS GYRO FOR SUPER AUTO STABILIZATION (AST TECHNOLOGY). WE LIKE IT BECAUSE IT IS AN ALL IN ONE MODULE WHICH IS THE RX AND THE GYRO BUILT INTO ONE COMPACT MODULE. NO JUMPER WIRES OR SECONADRY MODULE TO PLACE SOMEWHERE ON YOUR HELICOPTER. WE ALSO USED THE WALKERA WK-2601H HIGH SPEED RUDDER SERVO FOR SUPERIOR TAIL AUTHORITY. A VERY EASY INSTALL FOR ALL WALKERA USERS WHO DON'T WANT TO PURCHASE ANOTHER TRANSMITTER. THE SETUP INSTRUCTIONS ARE EXACLTY THE SAME AS ON THE WALKERA V450D03 AS THIS IS THE SAME ELECTRONICS THAT ARE USED ON THIS HELICOPTER. VISIT US AT: WWW.RTF-HELI.COM |
|
