LOW BUCK SERVO

[lowbudget]

what low buck servo will work on
falcon 40 and a dragonfly 4-1 ;D = VIC

[Solitaire]

I don't have a Falcon40, Vic, but you can check these out. The dimensions are shown. These are analog.
www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=662&Product_Name=HXT900_9g_/_1.6kg_/_.12sec_Micro_Servo

You could probably use standard Esky digital (EK2-0508) servos, too. Available on eBay for less than $5

[rtfheli]

Apr 27, 2009 15:55:20 GMT -6 lowbudget said:

what low buck servo will work on
falcon 40 and a dragonfly 4-1 ;D = VIC

I have the Exceed Falcon 40/ Walkera #4/ E-Sky HBFP helis. You can use the digital servos from the E-Sky HBFP. They cost more. Like Solitaire mentioned, the HXT 9 Grams servo is a low cost servo. You will however have to wait since it's coming from Mainland China. You can get TowerPro SG-90 servos at xheli.com for $4.95. All servos (TowerPro SG-90, Hi-tec HS-55, the HXT900, E-Sky Digital Servos are all good and will all wear out as they all use nylon plastic gears and the small motors are carbon brushed wich eventually fail. So get the cheapest. I've tried them all.

I use the MKS Copper gear servos. They cost more, but are more precise and have a higer torque.

[mightyxxwhitey]

I have used the tower pro 9g as a replacement for my falcon and G2.

[Dave]

Just got two Tower Pro SG-90 from Xheli got to me in four days......hummm somebody must have got an ass chewing.
Dave