|
|
Post by mightyxxwhitey on May 22, 2009 7:40:23 GMT -6
Does anyone have a video of their G2 doing 3d flights. I have looked and cant seem to find any. I would like to see what my heli can do.
|
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on May 26, 2009 9:44:33 GMT -6
Sorry don't have any vid but you should search You Tube. I seem to recall putting in G2 3D a while back and getting some stuff.
The G2 isn't a really good 3 D performer except in the hands of a very experienced pilot and even then it's not great because of design and material limitations. It will do rolls, loops, inverted and a bunch of other tricks just not very tight.
Happy landings
|
|
|
|
Post by mightyxxwhitey on May 26, 2009 15:46:19 GMT -6
thanks 19000... im not in any way going to do 3d yet.... But hey if I can get it to roll, it will be awesome
|
|
McKrackin
First 30 Member 
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on May 26, 2009 19:44:20 GMT -6
19,,,,I know you put the G2 through the ringer.Just like I tried so many times.
Video it once.We wait.
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on May 27, 2009 5:36:57 GMT -6
Ern I don't have a good camera. I've got an old DAT JVC. I don't even know if it still works. We stopped taking video 5 years ago.
Speaking of the G2; I had the lower main bearing seize up and it ate the frame. I rebuilt it this weekend and now I've got a huge violent and intermittent tail wag. I've reset the V-1 (still using the WK Tx) and now it won't hold a heading and wants to wander either ccw or cw. Changed gyros and it's doing the same thing so I doubt it's the gyro. I'm thinking maybe the V1 dial on the Tx isn't working right. Any thoughts?
Happy landings
|
|
McKrackin
First 30 Member
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on May 28, 2009 15:53:29 GMT -6
No,sorry 19. Every time I had trouble with a Walkera radio I was completely lost.Usually ended up with a new one  |
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on May 29, 2009 5:43:01 GMT -6
Thanks Ern.
Happy landings
|
|
McKrackin
First 30 Member
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on May 29, 2009 17:34:38 GMT -6
By the way,for the OP,here is a G2 inverted.
It has a sad ending but gives a look at the 90* head hard at work...
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on May 30, 2009 6:40:02 GMT -6
That's a very good representation of a G2 inverted. Ouch! No room for that outside loop at that altitude. If that's what he was going for. You definitely need 3X mistake factor altitude with a G2. ;D
Happy landings
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on May 31, 2009 12:15:52 GMT -6
BTW I finally got the G2 gyro trimmed out. I posted the procedure on pslr thread on his problems with the 35C.
Happy landings
|
|
