rtfheli
DEALER 
FIRST 30 MEMBER
"Live to Fly"
Posts: 867
|
Post by rtfheli on Jun 27, 2009 18:03:35 GMT -6
Rating 5 out of 5Pros: Generous amount of wire length, comes with 8 L.E.D.s, works from any empty Rx Channel Cons: Can cause some glitchiness if the main unit is too close to the Rx. GT R/C LED Lighting system for night flying. R/C LED Lighting System, easy to use on scale lighting set suittable for 30-60 size scale model Helicopters and Aeroplanes. Included; 2 red Beacon 2 White Strobing, 1 Red 1 Green navigation light A set for landing light. Includes flush mount LED plugs, to install in canopies or wings. Works great on any co-axial heli. Very Nice and inexpensive relative to X-treme LEDS and others.  For this video we used only the 2 red SLOW blinking beacon lights, 1 red FAST strobing light, and two bright navigation lights mounted on the canopy of the E-SKY BIG Lama Dual brushless motor system with the Super Skids 400 Landing gear system. 
|
|
Raygun
Moderator 
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Jul 20, 2009 10:56:22 GMT -6
If you put more twist in the wires ( more than they come with) before you cut them you can cure some of the glitch problems.. Ray
|
|
