Kit: Exi T450 Carbon Fiber edition
Motor: Scorpion HKII-2221-8
Pinion: 12T
ESC: Hobbywing Platinum 40 amp
Gyro: CNCHelicopter G401B
Servos: Hitec HS65HB on cyclic
Futaba S9257 on the tail
Batteries Used: Zippy 2200ma 11.1v 25C and 30C
Radio System: DX7 w/ AR6200 Rx
Tx Settings:
Throttle norm: 0-INH-80-INH-100
Throttle ST1: 100-INH-85-INH-100 (2700 headspeed)
Throttle ST2: 100-100-100-100-100 (3000 headspeed)
Pitch curve norm: 40-INH-50-INH-100
Pitch curve ST1: 0-INH-50-INH-100
Pitch curve ST2: 0-INH-50-INH-100
Swash mix:
+72% Pitch (+/- 10 degrees)
+65% Elevator (+/- 6 degrees)
+65% Aileron (+/- 6 degrees)
Expo:
Elevator and aileron: +25%
Rudder: 0%
Gyro sensitivity:
Rate: 35%
HH: 68%
Upgrades/Mods:
Align: All shafts
Align: Flybar
K&B: Tailblades
CopterX: CNC head and tail (destroyed most of the original CNC head/tail parts)
K&B: Head dampers
Carbon fiber main blades from Hobbycity: CF325-White
Xheli: Fiberglass canopy
Other notes: Flybar weights are installed, but all the way towards the head. The heli is smoother with them all the way out.
====
Sorry, but I had the wrong part number on the motor!
It's not the 2216, but it is the HKII-2221-8. Sorry again.
