|
Post by nunyabizniss34 on Aug 12, 2009 14:56:22 GMT -6
And the winner is.....ME!!! Was loosening a screw on the tail servo mount, the screw was being a b!tch so I used a little force...the servo mount snapped and the screwdriver bit buried itself in my left palm...approx 3/4 of an inch into my hand. Had to use needle nose pliers to remove the bit from my hand. Not very pleasant...but lesson learned! Hurts like a b!tch! Colin
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Aug 12, 2009 15:50:43 GMT -6
Ouch!
Don't feel too bad about it though. I watched a guy stab himself in the leg with an exacto knife, all the way to the handle, cutting a piece of foam and another guy just about cut his thumb off trying to score a line using a straight edge. They were both concentrating so hard on their tasks they just forgot where the pointy end was going. ;D
Happy landings
|
|
|
Post by Dave on Aug 12, 2009 19:17:14 GMT -6
|
|
|
Post by nunyabizniss34 on Aug 12, 2009 19:18:38 GMT -6
Jeez Dave, wasn't quite THAT bad Colin
|
|