|
|
Post by mightyxxwhitey on Oct 13, 2009 14:51:02 GMT -6
I made a barrier to prevent my battery wires form rubbing the brushless motor, but now I couldn't put the canopy back on. So I bought a 450 canopy and made it fit. Got canopy pins, and extra grommets. The barrier is just plastic that I cut and CA glued it to the frame.  See the new pins    It took me a few ties to get it straight, have 2 extra holes on one side. |
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Oct 13, 2009 15:25:32 GMT -6
Nice job on the canopy mod whitey. Weren't we talking about that quite a while back? Also like your mod to keep the wires off the motor. It can really ruin your day when a battery wire shorts out on the motor.  Happy landings |
|
|
|
Post by nunyabizniss34 on Oct 13, 2009 16:03:38 GMT -6
Nice choice on the canopy too, I have been looking at that one for my EXI 450. Nice to see what it looks like on an actual heli instead of just a picture of it.
Colin
|
|
rtfheli
DEALER 
FIRST 30 MEMBER
"Live to Fly"
Posts: 867
|
Post by rtfheli on Oct 16, 2009 6:35:35 GMT -6
Nice mod on the canopy. Was wondering if a 40 canaop would fit the Walkera #36/Exceed G2.  |
|
