|
|
Post by akphill on Nov 9, 2009 1:09:17 GMT -6
OK so far it has been OK to build this one
futaba 6 ex fasst radio
futaba r6106hfc rx
align 30 amp esc
scorpion 2221-8 motor
11 tooth pinion
one hs65 servo
3 sg90 servos
gyro is an eflite 110
metal tail
metal copterx head
exheli yellow dragon 450 canopy
set of maverick 335 main blades
no fly bar weight's
align flybar rod
carbon fiber fins
Left to do is setup head set tracking and Waite for three new turnigy servos to come in the mail
then should be ready to test the new heli copter ;D
|
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Nov 9, 2009 15:23:18 GMT -6
I'll be looking forward to hearing how you like it. ;D
Happy landings
|
|
|
|
Post by akphill on Nov 9, 2009 23:21:28 GMT -6
Was wondering if anyone has some good throttle and pitch curves to try on this heli any suggestions are welcome
OK got it am having issues with the tail it wants to shake back and forth violently with the higher throttle wont trim out with tx and the gyro gain wont take it away so ordered a new tail servo an align ds420 will try that if that don't work will change the gyro to something else?
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Nov 18, 2009 17:52:25 GMT -6
If this is a budget build I like the telebee.
Happy landings
|
|
|
|
Post by nunyabizniss34 on Nov 18, 2009 18:09:19 GMT -6
+1 on the Telebee if on a budget
Colin
|
|
|
|
Post by akphill on Nov 18, 2009 18:40:40 GMT -6
Well it started out as a budget build but I ordered the ds420 and then I have ordered a gy401 gyro those two Items are as much as i have in the rest of the copter so am hoping no more tail issues
Well almost as much b ut whose counting he he he!!
|
|
akent
Moderator
FIRST 30 MEMBER
I love the 500!
Posts: 2,826
|
Post by akent on Nov 22, 2009 17:22:39 GMT -6
akp, the 11t pinion is very small. The headspeed will be very low, unless you run a high throttle setting.
I am running a 12t pinion and it just hits 3k rpm at 100% throttle. You will be a few hundred rpm below this. This is of course if you are running the standard Trex 450 main gear teeth.
Best,
Kent
|
|
|
|
Post by akphill on Nov 22, 2009 18:46:45 GMT -6
thanks Kent I did change the pinion to a twelve tooth pinion and it is running a 150 tooth main gear But is still giving some tail wag issues I think it is mechanicle
|
|
