Transpro V2 EXI450 ZL Super Edition

[akphill]

Maiden flight hovering the Exi still needs some tweekin

[BTCat]

Looks Pretty Smooth, AK. The tail held real well, too. What motor are you using. Sounded kind of like my Alpha 400.

BTW, Beautiful background!

[Solitaire]

I like that heli, Phil. But you already knew that.
Sounds like you could up your headspeed a tad.

[akphill]

well probably shouldn't tell you guys this motor is a generic motor 4000kv's running a 13 tooth pinion hovering around 60% throttle .

but just hovering around I think I wont be putting it in idle up for awhile might be too fast but will see

[akent]

That heli sounds nice!
4000kv is HIGH for a 450 on 3s with a 13t pinion!!!!

The headspeed might be deceiving from the sound...
It sounds pretty fast to me!

I hope to post a video soon with my Scopion 2221-8 with now a 13t pinion at 3400. It was at 3000 with a 12t. The sound difference is large!

Humm...
Kent

[akphill]

The copterx has the 2221-8 with 13 tooth pinion in it and it sounds wild this one sounds quite compared to it

[dubehigh]

sounds smoooth and a low tone to it. I LIKE IT. ;D

[akphill]

I'm wondering if the fact that it has 3 main bearing's might make it smoother sounding

[BTCat]

That could be. I also wonder what your pitch is when you are hovering. I usually would suspect around 3.5 to 4.5 degrees. May be less with that kind of head speed

I also wonder how much the blade tip style affects the sound

Anyway, nice 450. Don't fly off that hill ;D