|
|
Post by elkmaster01 on Mar 7, 2010 16:51:19 GMT -6
I need a 11T pinion,,,,MOD .6 and 5mm bore. The only listings I've found are from REVCO but they have been out of stock for months.
I need it for my T-Rex 500 with the Turnigy Typhoon 500H motor. I'm running the 12T pinion and I have to dial back the throttle curve,,which I don't like. I'd rather run the motor at 100%,,,and I don't want to burn up another ESC,,,IF,,maybe,,that might have been a factor.
HELP!!
Randy
|
|
Raygun
Moderator 
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Mar 7, 2010 18:43:44 GMT -6
I have not seen one of those yet but if you find one and the bore is wrong I would be happy to fix that for you. Ray
|
|
Raygun
Moderator
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Mar 7, 2010 20:54:25 GMT -6
|
|
|
|
Post by Solitaire on Mar 7, 2010 21:53:02 GMT -6
|
|
|
|
Post by elkmaster01 on Mar 9, 2010 18:53:12 GMT -6
Ray,,all those are for 1/8" shafts(3.17mm). But we're getting closer!!LOL |
|
akent
Moderator
FIRST 30 MEMBER
I love the 500!
Posts: 2,826
|
Post by akent on Mar 9, 2010 20:07:00 GMT -6
That's a bummer deal, Elk. It seems that folks have been going through that for a couple of years now.
I didn't find where someone tried a 0.7M gear. Those are available. I don't know if that would be close enough with such a small pinion?
Humm...
Kent
|
|
Raygun
Moderator
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Mar 9, 2010 20:50:06 GMT -6
Ray,,all those are for 1/8" shafts(3.17mm). But we're getting closer!!LOL It does not matter I just make a piece press it in then rebore so if all else fails get one send it to me and I will machine it for you. I have gotten pretty use to this I have never been able to just buy what I want and have it fit I have had to modify every one. Ray |
|
