|
|
Post by cubusaddendum on Apr 3, 2010 11:32:39 GMT -6
Summary: * 250-size FP coaxial (basis: Walkera 53Q3) * Flybarless * Dual swash plate (with 90degree phase correction to upper rotor disk) * Split dihedral tail fins * Esky rate gyros on cyclic axes * E-Flight 3-in-1 * Spektrum AR6100 * 2BLC converter board * 2x Hobbywing Pentium 10A ESC * 2x Alpha 250 brushless outrunners * 11.1V 1800mAH Li-Po Attachments:
|
|
|
|
Post by cubusaddendum on Apr 3, 2010 11:35:14 GMT -6
Here's a close up from the other side, showing some more of the extensive electronics needed to keep this bird in the air. Attachments:
|
|
McKrackin
First 30 Member 
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Apr 3, 2010 12:50:31 GMT -6
Does it fly?Video?
What are the dimensions?
|
|
|
|
Post by cubusaddendum on Apr 3, 2010 12:59:08 GMT -6
Yeah it flies, although it's quiet exhausting due to the level of concentration you need. I think this is why I found the Blade SR quiet accessible from the get go.
I've been waiting for the weather to brighten up so I can get some FFF shots in the park. I also have to convince the gf to help me film it.
Length: 350mm
Height to top of mast: 260mm
Rotor diameter: 450mm
|
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Apr 3, 2010 13:15:50 GMT -6
That's quite a nice piece you've turned out. I look forward to seeing the vid too. What is the canopy from?
|
|
|
|
Post by cubusaddendum on Apr 3, 2010 15:05:59 GMT -6
That's quite a nice piece you've turned out. I look forward to seeing the vid too. What is the canopy from? It's a spare nose section from Kamov scale fuselage I trashed last summer. For your interest: www.youtube.com/watch?v=QN77uRglaG0The fuselage kit came from Darth. |
|
|
|
Post by r/c basher on Apr 7, 2010 10:09:20 GMT -6
Thats sweet.  |
|
akent
Moderator
FIRST 30 MEMBER
I love the 500!
Posts: 2,826
|
Post by akent on Apr 7, 2010 18:34:59 GMT -6
That's awesome!
Very impressive work on that heli!
Kent
|
|
