|
|
Post by Gabe on Feb 20, 2009 21:00:26 GMT -6
Hey guys, I'm lookin for help setting up this heli properly. If anyone knows anything about the TX, which mode it should be in and so on, that would be a HUGE help. I'm hovering in my living room in "H" mode. The TX also has "C" mode for CCPM, but I haven't set the pitch or anything like that yet so I'm a little nervous about switching over to C mode. Also, the blade tracking is a little off and there are links running from the swash all the way up, one a little above the swash on the mixer (  ) to the flybar, and then a short non-adjustable link from the flybar to the main rotor head. Which ones do I adjust to fix the tracking (See pic)? Thanks guys and thanks Serial Grillers for sending me over this way. Gabe  |
|
|
|
Post by Gabe on Feb 22, 2009 14:43:51 GMT -6
OK I found the answers, if anyone is interested.
TX should be set to mode "H" since this is not a CCPM heli. Is has a single servo for the pitch and separate servos for the aileron and elevator.
Blade tracking is set using the short links.
|
|
19000rpm
Moderator 
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Feb 26, 2009 17:56:22 GMT -6
If you have any other questions about the setup go to youtube and look for the G2 setup video which deals with a very similar single servo for pitch eccpm heli.
Happy landings
|
|
|
|
Post by Gabe on Feb 27, 2009 7:20:57 GMT -6
Awesome!
Thanks 1900rpm!
|
|
) to the flybar, and then a short non-adjustable link from the flybar to the main rotor head. Which ones do I adjust to fix the tracking (See pic)?
