Raygun
Moderator 
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Dec 17, 2011 15:37:53 GMT -6
Well after my MCPX board melt down Ernie found me a Align 3G unit for about the same money as a new MCPX board. So I am rebuilding the Huey to accept the changes and man what a wiring nightmare!!! This thing looks like an explosion in a steel wool factory and try to make this look neat?? Of course I did not help it any with strobe boards, Lipo alarm, RX with satellite RX two esc's and so on. If this thing run's into a tree it will be a toss up which one wins........ pictures soon.. Ray
|
|
McKrackin
First 30 Member 
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Dec 17, 2011 20:04:13 GMT -6
lol...I hate wiring.
I find it ironic that my nitro helis have way more wiring than an electric heli and less room to put them with a big engine and fuel tank taking up ALL the inside of the frame.
|
|
Evan
SILVER MEMBER
Posts: 407
|
Post by Evan on Dec 17, 2011 20:41:41 GMT -6
I thought my 600 had tons of room, but I'm barebones on the eltronics need
|
|
Raygun
Moderator
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Dec 17, 2011 21:08:49 GMT -6
I have always been anal on the neatness of my wiring I may have to give in a little  You would think with the Huey body there would be tons of room and there is but to get the correct CG most of it has to be up front.. |
|
You would think with the Huey body there would be tons of room and there is but to get the correct CG most of it has to be up front..