|
|
Post by alonte on Dec 25, 2011 16:12:11 GMT -6
I was flying my heli and I crashed it but nothing broke but idk. When I give it throttle the tail blade spinds because it's belt driving but the main blades don't. Like it doesn't Ingage for some reason. Do y'all think it's the main gear set . Tell me what u think . I need to be fix . Help.
|
|
|
|
Post by akphill on Dec 25, 2011 16:54:14 GMT -6
Sounds like the one way bearing is broken.
|
|
McKrackin
First 30 Member 
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Dec 25, 2011 16:59:46 GMT -6
Stripped main gear.
Broken lower jesus bolt.
Bad one way bearing.
|
|
|
|
Post by alonte on Dec 25, 2011 18:18:09 GMT -6
ok thank u so do u just buy the whole main gear set ?
|
|
McKrackin
First 30 Member
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Dec 25, 2011 18:54:19 GMT -6
Check each thing to see what you need.
If the gear is stripped,it'll be obvious...missing teeth.
|
|
|
|
Post by alonte on Dec 25, 2011 19:24:25 GMT -6
nothing is stripped everything look fine it's just it wnt ingage so do I replace the baring ? It sounds like it is the baring
|
|
McKrackin
First 30 Member
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Dec 25, 2011 19:36:46 GMT -6
Sounds like the one way bearing then unless the bolt is broken or missing in the gear.
|
|
|
|
Post by alonte on Dec 25, 2011 20:17:44 GMT -6
nothing is stripped everything look fine it's just it wnt ingage so do I replace the baring ? It sounds like it is the baring
|
|
McKrackin
First 30 Member
First 30 Member
Flippin' the bird!
Posts: 3,720
|
Post by McKrackin on Dec 26, 2011 14:38:26 GMT -6
Is it possible that your motor is running backwards?
Have you had it unhooked?
What direction are the tail blades turning?
|
|
akent
Moderator 
FIRST 30 MEMBER
I love the 500!
Posts: 2,826
|
Post by akent on Dec 31, 2011 17:18:56 GMT -6
That's a very good thing to check!
I've done that before.
Had me stumped for a while.
Kent
|
|
