mid stick 80% throttle question

[Evan]

I'm wondering f I should reset my throttle servo arm level at mid stick now that I've got my pitch curves figured out.

I talked my self out of it. It just has to be like this.

Pic is mid stick 80% throttle in idle 1

[McKrackin]

You want the throttle valve dead center at 50% throttle and 50% trim and the servo horn and throttle horn level and parallel.

Don't worry about where the stick is.
Move the throttle stick up until the servo channel monitor reads 50%

[Evan]

50% is center, but i started thinking that im flying 80% center of throttle travel. 80% is as low as it goes