Bind a G2 to DX7

[McKrackin]

Well,I was bored and decided to get some binding practice and set up practice with my DX7.
I have an AR 6100E Spektrum RX I'm planning to use on the 3DX project.Eventually ;D

Anywho,I put it on the G2 and did the bind thing.It works!!!
I used AUX1 for pitch,Gear/Rudder for the gyro and the rest are self explanitory.

Ch1 norm
Ch2 Rev
Ch3 norm
Ch4 Rev
Ch5 norm
Ch6 Rev

Throttle curve is same as my TREX 500
Throttle curve in stunt 1&2 is 100% 81.5% 65% 81.5% 100%
Pitch curves match throttle curves for now.

I didn't mess with the revo or expo.

Anywho,the G2 flys nice with the DX7 calling the shots.

[McKrackin]

Oh,I forgot,now the G2 has a throttle hold so I can do autos and check pitch without unhooking the motor.Kool ;D

[19000rpm]

That is cool on the throttle hold ern. One of the things I liked about the stock G2 was the little red arming button. While not a throttle hold, it was nice for working on the heli when you didn't want the motor powered up.

I'm using the brushed G2 esc on a Spitfire now and it's nice to have access to all the controls with out the throttle armed.

Can you post a vid on the new G2 in the air?

Happy landings

[McKrackin]

lol....Sorry 19.
I started playing with revos and expos and right now I'm chasing the G2 around so much I can't even hover.
No crash yet!!!I just can't get it to sit still.
I could erase and start over but I refuse ;D
I'll dial it in on my own or kill it trying ;D

[19000rpm]

Good going Ern. You take the most stable easy to hover 6ch on the planet and make it not. ;D

Happy landings