BS question

[rmhovis]

With motor off, when I push the right stick forward. only the left servo moves. This makes the heli go forward and to the right.
Note the left servo does not move. Anyone know if you can adjust this?
I'm able to hover with it like this, but it takes a lot of stick moving.

[Raygun]

Set all trims except throttle to center lift off if it goes one way or another adjust it at the ball link not the TX you don't even have to lift off if it scoots across the floor adjust it out so when you lift off it goes straight up. Try and make all adjustments on the heli not on the TX. See if that does not help I think your swash plate is just a little off. Ray

[lowbudget]

a little problem i ran into - the servo linkage ball at the sevro screw stripped - rocking up and down - go forward and it would push the aleron servo linkage down and go forward and to the right - could your problem also ? = VIC

[akphill]

I have only been playing with my star for a couple months but i have noticed that when you move the right stick forward only the left servo arm moves which creates forward movement and when you move the right stick left and right you get left and right movement or right servo movement i have not noticed any drift with the forward cyclic movement but i did have to make some adjustments to the swash plate to get the star under control forwards and backwards couldnt trim and she tried to commit suicide on me if your getting undesirable drift try adjusting the right servo arn a little bit hope this helps
AKPhill

[Raygun]

On these everything helps. Ray