Raygun
Moderator 
FIRST 30 MEMBER
The needs of the many out weigh the needs of the few
Posts: 1,567
|
Post by Raygun on Apr 7, 2009 13:44:48 GMT -6
Hi everyone I just thought I would keep you guys informed about the adjustable linkage's I just ordered the die's they are starting to make them today and they should be done within three days. I picked the most popular thread size that will work with most of the stock ball links on the market. These will be self tapping into plastic using your old ball links if you need a bigger size than what I have picked that is no problem the bigger the die the cheaper it is to build. The center will be a knurled aluminum turn buckle so you can easily grasp it with your fingers. I have found only slight movement make a huge difference. I have these on my Blazing Star and after adjusting them I would challenge anyone to a hands free hover not just letting go of the TX for a few seconds I mean laying the TX down on the ground. I will be contacting a few of you and will send prototypes to test for me thank you for any information you can add... Ray
|
|
19000rpm
Moderator
FIRST 30 MEMBER
Posts: 5,183
|
Post by 19000rpm on Apr 7, 2009 16:23:52 GMT -6
Thanks ray for all your hard work and ingenuity to make the glitchy old BS into a real heli.
I'm sure your new ball link control arm is going to save us all countless hrs. of wasted time with the ball link pliers and give us those fine adjustments you couldn't get any other way.
Don't expect too many takers on the hands free challenge ;D
Happy landings
|
|
