|
|
Post by akphill on Apr 8, 2009 1:03:11 GMT -6
thought i would share what i have done with my belt  didn't like the plastic rotor head so oredered a new copterx head and installed it   used the belt main shaft and shortend the top 2mm so the fly bar gets full movement and then ordered a xmseller swash plate for the delt so i didn't have to modify the frame on the belt. used copterx ball links to attach control rods to swash and belt ball links to belt side  Had to file anti rotation bar out to accomodate the anti rotation bar it's bigger  and then i put a set of 325 mm carbon fiber blades on the copter and used a lot of locktite a lot of screws were allready done but i redone them anyway  I purchased the rotor head from Miricle-Mart for $59.00 and picked up new flydar paddles here at local hobby shop for another 5 buck's when i start this bird up it is really awsome to see this crank up it is so smooth no vibrations hovers right where you put it |
|
akent
Moderator 
FIRST 30 MEMBER
I love the 500!
Posts: 2,826
|
Post by akent on Apr 8, 2009 14:28:27 GMT -6
Great mod!!
Thanks for sharing!
Kent
|
|
|
|
Post by Solitaire on Apr 8, 2009 18:59:03 GMT -6
Nice job, Phil
That's one of the things I don't like about my Belt. All the plastic plus the servo linkage setup. Direct to swash is so much tighter...and simpler.
|
|
